Clean Rain Advanced

Clean Rains

logo-clean-rain-advanced

Description Code
Clean Rain Advanced
Multi-Fit (2×3″ and 3×4″, 3″ and 4″) DDCR98

logo-clean-shieldlogo-smart-sense-first-flush

logo-mozzie-preventionlogo-paintable

THE PRACTICAL CHOICE FOR ALL IN ONE RAINWATER HARVESTING

Clean Rain Advanced™ is an all in one rainwater filtration and collection system. Simple and reliable mechanics allows the filter (Clean Shield™ technology) to shed leaves while the ‘Smart Sense’ first flush diversion system automatically activates when water is detected and diverts the first flush of rainwater which contains contaminants from the roof to stormwater.

Clean Rain™ allows the user to connect multiple outlet hoses to direct water to a pool, garden, rainwater tanks/cisterns or rain barrels. The Clean Rain™ body also rotates 180° allowing it to easily adapt to different installation environments.

Features and Benefits

  • The new filtration technology deflects leaves and debris away from the flow of water (Clean Shield™), allowing greater flow rates and maximising collection of rainwater to the rainwater tank/cistern
  • The compact inline First Flush Diverter diverts the first flush of rainwater which contains contaminants from the roof to stormwater – no additional chamber required (Smart Sense technology)
  • The Clean Rain™ Body swivels for convenient outlet positioning, fits standard garden, 1″ sump and 1½” pool hoses, and 3″ pipe
  • Multi-fit downspout adaptors – 2×3″ and 3×4″, 3″ and 4″
  • Minimal maintenance
  • Easily accessible on/off switch

How Clean Rain Advanced works

USA_CR-Advanced-how-wor

How does Clean Rain Advanced™ collect cleaner water?

  • Self cleaning single screen technology deflects leaves and debris away from the flow of water (Clean Shield™)
  • Smart Sense™ First Flush water diverter prevents contaminants contained in the first flush of water from the roof (such as dirt, dust, bird droppings and insects) from being collected.
  • Smart Sense™ First Flush automatically adjusts to divert the optimum amount of dirty rainwater down the downspout.
  • Stainless steel mesh screening prevents mosquitoes, bugs and vermin entering your rainwater through Clean Rain Advanced™.

Clena-Rain-Advanced-Diagram

Ideal for

Clean-Rain-USA---Ideal-for-

Installation Instructions

1.  Remove 23.6″ of downspout from where the Clean Rain™ is to be
situated. Ensure all edges are clean and smooth.
2.  Using the quick release tabs remove the Clean Shield™ by lifting it up
and out.
3.  Fit the correct downspout adaptor to the bottom of the Clean Rain™.
4.  Install the Clean Rain™ by sliding it up behind the top section of cut
downspout and then down into position. The Clean Rain™ should be
slid firmly onto the bottom downspout until it can be pushed no
further.
5.  Screw the top of the Clean Rain™ in position through the screw slots
provided. Ensure appropriate screws and anchors (if required) are
used.
6.  Insert the Clean Shield™ back into the Clean Rain™. Ensure the Clean
Shield™ is sitting firmly in place and check installation is secure.